Inspection Services...

Euro Inspection offers following kinds of inspection services and also does customised inspection services
First Article Inspection Service 
During Production Inspection
Preshipment Inspection Service
      a) Container Loading Supervision
      b)Technical /Quality Inspection Service
      c)Compliance Inspection

First Article Inspection Service: First article inspection  is one of the primary methods for the "inspection and testing of vendor components".
The purpose of the First Article Inspection is to give objective evidence that all engineering, design and specification requirements are correctly understood, accounted for, verified, and recorded.

A complete, independent, and documented physical and functional inspection process to verify that prescribed production methods have produced an acceptable item as specified by engineering drawings, planning, purchase order, engineering specifications, and/or other applicable design documents.

FAI initially started in Aerospace but is now very common in all critical components.

 

During Production Inspection:

Inspecting the goods after production is finished is often too late. In some cases, a whole order is found unsellable just before shipment; the factory is unable to repair it; re-ordering materials and re-producing would take 2 months; and the supplier refuses to do it for free. This causes anxious moments for all involved.

This is where DUPRO Inspections comes in ( During production Inspection)

The objective is to catch quality issues before it is too late:

  • Typically 10-15% are already manufactured can (hopefully) be re-worked without inducing a delay;
  • The same issues can be avoided on the rest of production.

If quality problems are found at this stage, buyers are advised to force the supplier to work on a  comprehensive corrective action plan. It is a way to document an issue to make sure it is repaired appropriately… and also avoided for repeat orders.

You will receive a detailed report within 24 hours informing you if production passed or failed. Ask us for a free sample report !

Options Available :

 Picking and Shipment of Representative Sample :  On request our inspector  will collect a sample piece from the batch produced and courier it to you . Courier charges in such a case is extra. You will have to provide exact specification of what kind and quantity of samples you would like to be picked and shipped to you.

 

Output of a During a Production Check typically is :

  • A Detailed Inspection Report . 
  • A agreed Comprehensive Corrective Actipn Plan Agreed between Supplier and Buyer*.
  • A Improved In process Inspection plan made by the buyer*. 

* Does not includes involvement of EI inspector 

PRICING : Typically 299 USD  per person day ( 8 hours) in South and South East Asia and  600 USD in  Europe and North America. *( These are typical prices. Manday Rate varies from inspector to inspector ) 

Container Loading Supervision:

A Container Loading Supervision or Pre Shipment Inspection, guarantees the finished and packaged goods meet your specifications (product type and quantity) and are securely loaded for shipment.

  • Our inspector guarantees the conformity of the shipment to your specifications and the order quantity specified by you.
  • The container loading process is monitored by our inspector, assuring the container is loaded in its entirety and in a safe and secure manner.
  • Our inspector will take clear photographs of the products, cartons, shipping marks, loading process of the container etc.

You will receive a detailed report within 8 hours Ask us for a free sample report.

PRICING : Typically 280 USD  per person day ( 8 hours) in South and South East Asia and  550 USD in  Europe and North America. *( These are typical prices. Manday Rate varies from inspector to inspector ) 

 Options Available :

 Picking and Shipment of Representative Sample :  On request our inspector  will collect a sample piece from the shipment and courier it to you . Courier charges in such a case is extra. You will have to provide exact specification of what kind and quantity of samples you would like to be picked and shipped to you.

 Night Charges: Our inspectors normally leave the factory at 5:30 PM at latest to go back to the office and create the inspection report. However, from time to time inspectors may need to stay until after 5:30 PM in order to wait for late production, to supervise late container loading, or to implement the necessary corrective actions for some urgent shipments. In such a case our Inspectors are entitled to a person hour remuneration of 200% of their typical man day rate. Suppose a Inspector in South Asia  has a man day rate of  290 USD in such case the night charges would be USD 75 per hour.  Of course manday rate varies from Inspector  to inspector and the choice for selecting a inspector is provided to you while scheduling the inspection with us.

 

Technical /Quality Inspection Service:
 

The focus of this type of inspection is controlling the quality and/or consistency of goods. It is done typically when  at least 80% of production is completed and packaged.Specifications agreed and submitted to the factory and to the inspectors are  the most important underlying factor which will 

Typically we encourage our clients to specify in as much detail as possible to our inspectors the specifications and their corresponding acceptance crtieria which commonly include  but are not limited to :

  • Quantity 
  • Appearance : size, color ,shape
  • Dimension style, material specifications
  • Workmanship specifications
  • Functionality/ performance specifications
  • Testing if any to be done  and its acceptance criteria
  • Barcode test
  • Packaging check: shipping marks, label, hangtag, method of packing, carton quantity.

 

Compliance Inspection:
Typically  many countries have specific compliance requirements for products and product categories.
EI has more experience in dealing with compliances such as 

  • CE marking 
  • Directives of European Union 
  • AS 4024.1/ EN 60204/ 2006/42/EC
  • Pressure Equipment Code compliances- PED/ASME
  • Residue Analysis
  • RoHS
  • FCC/CISPER/CTick/NRTL Listed
  • Compliance of processed Food for  Residue  , Preservative, Flavor, Color etc


However EI is not a certification body and our inspection reports typically are useful only in areas where certification is not mandatory. Compliance inspection is not a substitute of Certification is compulsarily required by law, it may however be supplementary in providing confidence of compliance before production, during production or before shipment 



 


 
 
2012-03-27

EI upgrades Website to include e commerce and Online Ordering of Inspection/ Testing/Vendor Audit Services

Now all our services are available at your PC/Laptop

 
2012-03-26

EI launches its Services In UK and Indian Subcontinent 

Read More
 
 
 
© All Rights Reserved to EURO INSPECTION :: Home | Work with us | Contact Us | Policies | Join as a Inspector | Site Map

Tell us about our service | Tell us about your experience on our site | Report Error